Welcome to BAOYAODI — Rivets & Precision Metal Parts
Sales Hotline+86 153 7185 8918

Insights & Resources

Product knowledge and application support

You are here: Home > Insights & Resources

SPR Rivet Selection: What to Include in an Application Review

5.3mm SPR Rivets

BAOYAODI’s product literature presents self-piercing rivet series in 5.3mm and 3.3mm diameters. SPR is a cold joining process: the rivet pierces the upper sheet and expands in the lower sheet under the action of a suitable die, forming a mechanical interlock. The literature describes alloy-steel rivets with a Dacromet coating; the actual specification is confirmed for the application.

Start with the sheet stack

Provide the material of each sheet, individual thicknesses and the order of the layers. Also identify coatings and the required appearance of the completed assembly. A nominal rivet diameter is only one part of the selection.

Include the assembly conditions

Tell us about tool access, the available riveting machine and die, feeding requirements and the intended production process. These details help define the application review and any sample trials.

Agree the acceptance requirements

Share the drawing and required joint performance. Product suitability and acceptance criteria should be confirmed through application review and approved trials. This article is general selection guidance and does not establish a universal rivet specification for all material combinations.

BAOYAODI provides application design, assembly training and riveting tool maintenance support. Contact us with your drawings and joining requirements.

CallSales Hotline +86 153 7185 8918 WhatsAppWhatsApp / Mobile +86 153 7185 8918 InquiryTell us about your project